move engine to engine/

2026-05-13 17:55:59 +00:00
parent 10d0269a5a
commit f3dde6b668
38 changed files with 3141 additions and 0 deletions
--- a/engine/docs/2-midi-looping.md
+++ b/engine/docs/2-midi-looping.md
@@ -0,0 +1,90 @@
+# Per‑Channel MIDI Looping
+
+## Overview
+
+Each looper channel can be either **audio** or **MIDI**. Audio channels record and loop audio samples (existing behaviour). MIDI channels record and loop MIDI event sequences, using separate JACK MIDI input/output ports. The state machine (`IDLE → RECORD → LOOPING → PAUSED`) operates identically for both types.
+
+## Commands
+
+| Command                    | Source          | Action                                                     |
+|----------------------------|-----------------|------------------------------------------------------------|
+| `CMD_ADD_MIDI_CHANNEL`     | MIDI note 66    | Adds a new MIDI looping channel                            |
+| `add_midi`                 | FIFO pipe       | Same                                                      |
+| `CMD_REMOVE_CHANNEL`       | MIDI note 61    | Removes the last‑added channel (audio or MIDI)             |
+| `CMD_CYCLE`                | any note binding| Toggles channel state (IDLE→RECORD→LOOPING→PAUSED)        |
+
+## Ports
+
+When a MIDI channel is created, two JACK MIDI ports are registered:
+
+- `looper:channel<N>_midi_in`  (input)
+- `looper:channel<N>_midi_out` (output)
+
+The `<N>` is a global counter, independent of the index inside the internal channel array.
+
+## Recording
+
+During `STATE_RECORD`:
+
+1. All incoming MIDI events on the `_midi_in` port are stored in the channel’s event buffer, along with their frame offset relative to the start of the recording.
+2. The incoming events are also **forwarded** to the `_midi_out` port, providing a direct pass‑through during recording.
+
+**Buffer limit:** A channel can hold up to `MAX_MIDI_EVENTS` (1024) events.
+
+## Looping
+
+During `STATE_LOOPING`:
+
+- All recorded events are output at the **start** of every cycle (frame 0). This is a simplification; no per‑event timestamp scheduling is implemented. The loop length is determined by the total number of recorded events.
+
+## Pass‑Through
+
+During `STATE_IDLE` (and `STATE_PAUSED` for MIDI) incoming MIDI events are **copied** from `_midi_in` to `_midi_out` unchanged.
+
+## FIFO Pipe Commands
+
+The FIFO pipe at `/tmp/looper_cmd` accepts the following new line‑based commands:
+
+| Command       | Effect                                     |
+|---------------|--------------------------------------------|
+| `add_midi`    | Adds a MIDI channel                        |
+| `stop`        | Resets all channels to idle                |
+| `bind <ch>`   | Binds the next control note to channel `<ch>` |
+| `unbind`      | Resets binding to channel 0                |
+
+## Example Workflow
+
+1. Start the looper.
+2. Connect a MIDI keyboard to `looper:channel1_midi_in`.
+3. Send MIDI note 66 on `looper:control` to create a MIDI channel.
+4. Send a CYCLE command (e.g., MIDI note 62 under control key) to start recording.
+5. Play notes on the keyboard – the events are captured.
+6. Send CYCLE again to enter LOOPING mode – the captured sequence repeats.
+7. Send CYCLE again to pause, or send STOP (note 65 under control key) to reset.
+
+## Implementation Details
+
+- **Channel structure** (`struct channel_t` in `channel.h`):
+  - `type` field (`CHANNEL_AUDIO` or `CHANNEL_MIDI`)
+  - `loop` union containing `audio_buffer[MAX_BUFFER]` or `midi_events[MAX_MIDI_EVENTS]`
+- **MIDI event type** (`midi_event_t`):
+  - `timestamp` (frame offset relative to loop start)
+  - `status`, `note`, `velocity`
+- **Processing** (`process_callback` in `looper.c`):
+  - The callback checks `type` before routing to the appropriate handler block.
+  - MIDI handler reads from `midi_in` port, writes to `midi_out` port.
+- **Port cleanup**: On channel removal, both MIDI ports are unregistered via `jack_port_unregister()` after a one‑RT‑cycle grace period.
+
+## Testing
+
+Integration tests in `tests/integration.c` cover:
+
+- `test_midi_channel_add` – verifies that sending `add_midi` via FIFO creates `looper:channel<N>_midi_in` ports.
+- `test_fifo_stop_bind_unbind` – verifies that `stop`, `bind`, and `unbind` FIFO commands are processed correctly.
+- Other existing tests continue to verify audio‑only functionality.
+
+Run the test suite with:
+
+```bash
+make test
+```